What is the core of the turning-milling compound CNC lathe?

1. The basic structure and working principle of the turning-milling compound CNC lathe are the basic guarantee for improving the fault analysis capabilities of CNC lathes. This is the development of lathes. Because the accuracy rate is generally relatively high. Many companies are now using CNC lathes, so they are more convenient to operate. If it's just a surgery, it's very simple and requires just a little learning or training.

2. inCNC latheWhen processing parts, you must first design the processing plan based on the part drawing, and then write the part processing program. In the editing state of the lathe control device, input the prepared machining program into the memory of the CNC device. The information code is decoded, stored, processed and calculated by the CNC device of the CNC lathe, and the calculation results are distributed to the servo systems of each coordinate system of the lathe in the form of digital signals. After receiving the signal from the CNC device, the servo system of each coordinate system of the lathe drives the moving parts of the lathe through the servo system and transmission device, so that the CNC lathe can process parts according to a predetermined speed, range and path, and process parts that meet various requirements.

3. CNC lathe is a type of lathe developed in modern times. It consists of information carrier, CNC equipment, servo system and lathe body. Compared with ordinary lathes, the processing capabilities of CNC lathes have been significantly improved, and some workpieces that were difficult or impossible to process in the past can also be processed. It can be said that CNC lathes bring many benefits to daily life.

4. When processing on a CNC lathe, the program should be compiled according to the part drawing. The program code and instruction format basically comply with ISO standards and corresponding national standards. Then the program is input into the NC or CNC through the information carrier, and the CNC system issues instructions according to the program content. On the one hand, the motor in the servo system controls the movement of the lathe parts through the transmission device. On the other hand, the program is controlled by the motor in the servo system. On the other hand, it controls other auxiliary movements of the lathe, such as spindle speed, steering selection, start and stop cooling of the cooling pump, and completes the processing content with both parties.

5. CNC equipment is the core of small CNC lathes, often called NC (universal CNC equipment) or CNC (computer numerical control equipment). CNC is a way of early development of CNC lathes. Now most CNC lathes use CNC systems. The function of the CNC equipment is to receive the processing information input by the equipment, and after decoding and calculation, send corresponding command pulses to the servo system to complete the processing of the parts. The main body of the lathe is the mechanical component, including main moving parts, feed moving parts and supporting parts. For CNC lathe parts, the structure of the mechanical parts is simpler than that of ordinary lathes, but the requirements for various technical indicators are higher than those of ordinary lathes.